Pricing
How to Price a Job So It Pays You
A price is right when it pays for the job, pays you, and leaves the business something. Here is how to work it out before you send the estimate.
Free. No sign-up.
The quick answer
How to price a job: add the materials, count every hour (travel too) at the pay you want, add your fixed costs per hour, then divide by one minus the margin you want. In our example a room repaint costs $732.00 to do. For a 30% margin, charge $1,045.72. At $45.00 an hour plus materials it would bring $665.00 and lose $67.00.
01 / Read this
Before you start
Have three numbers ready: the pay you want for an hour of your work, your fixed costs for a month (van, insurance, phone, software), and the hours you can bill in a month. You only work them out once, then use them on every job.
Many owners are not sure of their prices. In a survey of 1,050 US home service business owners, 55% said they are very confident in their pricing. [1]
02 / Read this
Hourly, by the job, or by the square foot?
Clients like one price. You still need to know your hourly number, because it tells you whether that one price pays. There are three common ways to quote, and they all start from the same cost.
In our bedroom example the job costs $732.00 and the price for a 30% margin is $1,045.72. Take out the $215.00 of materials and divide what is left by the 11 hours: ($1,045.72 − $215.00) ÷ 11 = $75.52 an hour. That is the hourly rate that pays for your time, your fixed costs and your margin, with materials charged on top at cost.
Quote by the hour when the work is open ended, such as a repair where you do not know what is behind the wall. Quote by the job when you know the scope well, which is most estimates. Quote by the square foot or the room only when you have priced many similar jobs and know your hours for each. If you quote by the square foot, check it against your hourly number once a year.
- By the hour: the client carries the risk of a longer job.
- By the job: you carry that risk, so write down exactly what is included.
- By the square foot or room: fast to say, easy to get wrong on an unusual house.
03 / The workflow
How to price a job in 5 steps
Write each number down as you go. The order matters: the margin comes last.
-
List the materials
Everything the job uses: parts, paint, fixings, disposal fees, permits. Add the small supplies too, such as tape, sandpaper and drop cloths.
Never skip small supplies and disposal fees
-
Count every hour, at your pay
Count the hours on site and the hours to get there, buy materials and clean up. Price them at the pay you want, not at what is left over.
Labor cost = hours × your pay per hour
Helps avoid working for less than your own wage
-
Add your fixed costs per hour
Every hour you bill pays a share of the van, insurance and phone. Work it out once.
Fixed costs per hour = fixed costs a month ÷ billable hours a month
-
Add the margin you want
The margin is what the business keeps after every cost, you included. Divide; do not multiply.
Instead of: cost × 1.30 for 30%
Write: cost ÷ 0.70 for 30%
Price = total cost ÷ (1 − margin)
-
Check it, then put it in writing
Compare the price with what you charged for similar jobs. If you must charge less, choose what to cut on purpose. Then send a written estimate and get a yes before you start.
Doing this job after job?
InvoiceWren does steps 2 to 4 on every estimate line and shows what the job leaves you before you send it.

04 / Read this
Travel, shopping and the van count as hours
The two hours people forget are the ones before and after the work. Driving to the job, buying paint, loading the van and cleaning up are all time you cannot bill to another client. In the example above one of the 11 hours is travel and shopping, and it is priced like any other hour.
If your van or truck is a cost per mile instead of a fixed payment, use a yardstick you can defend. The IRS standard mileage rate for self-employed and business use is 76 cents a mile for Jul 01 2026 to Dec 31 2026 [2]. It is a tax rate, not your exact cost, so use it only as a starting point and use your own numbers when you have them. A round trip of 2 × 18 miles at that rate is $27.36, which belongs on the job as a cost, not in your head.
Count it once. If your van payment is already in your fixed costs per hour, do not also charge the miles, or the price will be too high. Pick one way and use it on every job.
05 / Read this
What your margin has to pay for
The margin is not your pay and it is not "profit" in the sense of money you can spend. It is what the business keeps after every cost, including your own hours. It has to cover slow weeks, repairs to your tools, and tax.
If you work for yourself as a sole proprietor, the IRS says you report on Schedule C, pay self-employment tax with Schedule SE and make estimated payments with Form 1040-ES [6]. The self-employment tax rate is 15.3%, made of 12.4% for Social Security and 2.9% for Medicare, and it applies when your net earnings from self-employment are $400 or more [3]. People in business for themselves generally need to make estimated tax payments if they expect to owe $1,000 or more [4]. You do not need to work out your tax to price a job. You do need to leave room for it, which is one more reason not to price at your cost.
Ask an accountant how much to set aside. This is not tax advice.
06 / See it done
A worked example
A made-up job: repaint one bedroom, walls and trim. US dollars, before sales tax.
| Paint | $180.00 |
|---|---|
| Tape, filler and sandpaper | $35.00 |
| Your pay, 11 hours at $35.00 (10 on site, 1 travel and shopping) | $385.00 |
| Fixed costs, 11 hours at $12.00 | $132.00 |
| What the job costs you | $732.00 |
| Price for a 30% margin | $1,045.72 |
| What the business keeps | $313.72 |
$180.00 + $35.00 + $385.00 + $132.00 = $732.00. $732.00 ÷ 0.70 = $1,045.71, rounded up to $1,045.72. Priced at materials plus 10 hours × $45.00 = $665.00, the job loses $67.00.
07 / Read this
When the client asks for a discount
A discount comes out of your margin, not out of your cost. Take 10% off the $1,045.72 price and the client pays $941.15. Your cost is still $732.00, so the margin falls from 30.0% to 22.2%.
To keep a 30% margin at $941.15 your cost would have to be $658.81, which means finding $73.19 of cost to remove. That usually means removing scope, not working faster. Offer a smaller job (one coat on the ceiling instead of two, trim left for later) and write the change on the estimate. Do not give a discount and keep the full scope.
Offer the client a choice of scope, not a lower price for the same work.

08 / Read this
Put the price in writing, and keep it
A price that is only spoken is easy to dispute. A written estimate lists what is included, what is not, the price, how it is paid and how long the price is good for. You can make one free with the estimate generator or send it from InvoiceWren, where your client can approve it on their phone.
Keep the estimate with the invoice. The IRS says to keep records for 3 years in most cases, and 7 years if you claim a bad debt deduction [5], and many service businesses keep everything for 7 years because it is simpler than working out which rule applies.
09 / Read this
Check your prices every year
Costs move. In the same survey, 65% of owners raised their prices in the last year, most often because of inflation (72%) and labor costs (50%). [1] Work out your fixed costs per hour again at least once a year, and whenever a big cost changes.
10 / In the app
Do it on every estimate with InvoiceWren
InvoiceWren does this sum for you, before you send.
- Your costs, onceAdd your fixed costs, your costs per job, hour or mile, your pay per hour and the margin you want.
- Every line checkedEach estimate shows what the job leaves you in green, amber or russet, and offers a price when a line is too low.
- Only you see itYour costs never reach the PDF, the email or your client's page.
- A price you can check laterThe estimate shows what the job should leave you, and the job keeps what it really cost. See job profit for the planned and the actual side by side. Your costs are private to you.
11 / Before you finish
Before you send the price
Your ticks reset when you reload this page.
Questions
Questions people ask
Should I charge by the hour or by the job?
Work it out by the hour either way, as in the steps above. Then you can quote one price for the job, which most clients prefer, and still know it pays you.
What margin should I aim for?
It depends on your trade, your area and how busy you are. Pick one number, use it on every job, and check each year whether the business kept what you planned.
What if my price is higher than other quotes?
Check your costs first. If they are right, a lower price means working for less. Explain what the price includes, in writing, so the client compares like with like.
Do I add sales tax to the price?
Sales tax depends on your state and on what you sell. Price the job before tax, then add any tax that applies. Ask your state tax agency or an accountant; this is not tax advice.
How do I price a job when I do not know how long it will take?
Price the part you can see, say what is not included, and say how the extra will be priced. For example, "Hourly at $47.00 for anything behind the wall, approved before I start." A change order is the way to price the extra once you know.
Should I show my hourly rate to the client?
You do not have to. Most clients prefer one price for the job. Know your hourly number for yourself, and show it only when the job is open ended and priced by the hour.
How do I price a very small job?
A small job still has a trip, setup and cleanup, so it needs a minimum charge. Count at least one full hour plus the travel, and say the minimum on your estimate terms before the visit.
How do I price a job when I have a helper?
Count the helper's hours as a cost at what they cost you, including payroll taxes, then add your own hours at your pay. The job profit example shows the sum line by line.
Is the price per hour the same as my hourly pay?
No. Your hourly pay is only one part of it. The price per hour also pays your fixed costs per hour and your margin, which is why it is higher than your pay.
Sources
Sources and further reading
Official guidance, checked on Nov 16 2026. Check the current rules before you issue a real document.
- Jobber, Blue Collar Strong: The 2026 Home Service Trends Report (survey of 1,050 US home service business owners, Dec 2025) 55% of home service owners say they are very confident in their pricing; 65% raised prices last year, most often because of inflation (72%) and labor costs (50%).
- IRS: Standard mileage rates For Jul 01 2026 to Dec 31 2026 the self-employed and business standard mileage rate is 76 cents a mile (72.5 cents for Jan 01 2026 to Jun 30 2026).
- IRS: Self-employment tax (Social Security and Medicare taxes) The self-employment tax rate is 15.3% (12.4% Social Security and 2.9% Medicare); it applies if net earnings from self-employment were $400 or more.
- IRS: Estimated taxes People in business for themselves generally need to make estimated tax payments if they expect to owe $1,000 or more; the year is divided into four payment periods.
- IRS: How long should I keep records? Keep records for 3 years in most cases, and for 7 years if you claim a loss from worthless securities or a bad debt deduction.
- IRS: Sole proprietorships A sole proprietor owns an unincorporated business by themselves and reports on Schedule C, Schedule SE and Form 1040-ES.
Check a price in ten seconds
Type your cost and the margin you want. The calculator gives the price and the markup.
Free tools and templates
Make the document this guide talks about. No sign-up.
More guides
- How to make an invoice
- How to Write an Estimate
- How to Write a Change Order
- How to Make a Progress Invoice
- How to Make a Receipt
- What to include on an invoice
- How to number your invoices
- Change order template for a small remodel
- How to write a deposit invoice (with a worked example)
- Estimate vs invoice: what is the difference?
- How to set and word late fees
- A five-step schedule for late invoices
- Net 30 and other payment terms, explained
- Payment reminder messages you can copy
- Progress billing for contractors
- Taking deposits as a photographer
- What to do when a client will not pay
- Best free invoice apps (2026)
- How to Work Out Your Overhead per Hour (with a Worksheet)
- Margin vs Markup: Why a 30% Markup Is Not a 30% Margin
Invoice templates by trade
Sample lines and answers for each kind of work.